Semiconductor Industry Valve & Relay Testing

The Bartol Mag-Probe is Used in the Semiconductor Industry to test Solenoid Valves and Relays and Offers No Load to Computer Drivers.

semiconductor Industry

Semiconductor

The Bartol Mag-Probe Testing Operation is Completely Isolated from Computer Loading Issues often present with a voltmeter test instrument. Before the Advent of The Bartol MagProbe the cost of service in terms of time, manpower, lost productivity and lost potential revenue was significant. Checking electrically operated solenoid valves and  relays in the semiconductor industry using conventional voltmeters was time consuming. It requires shutting down the production line in order to isolate the defective part and/or shutting off computerized controls to prevent loading of the computer output drivers.

The Mag-Probe has been proven to significantly reduce downtime thereby increasing incremental profits.

BartolMagProbe@gmail.com Business 208-321-7566
99% Faster Than A Voltmeter Fax 208- 378-1282

Order Now at BartolMagProbe.com

 

Your Name (required)

Your Email (required)

Subject

Your Message

About the Author
Bob Bartol has spent his whole life working with electronics in almost every capacity and spent many hours in Physics classes. He currently holds 4 U.S. patents and has been making a living off one of the patents "The Bartol Mag-Probe" for over twenty years. Bartol Research's Mag-Probe now has a global reach and is dramatically reducing trouble shooting downtime anywhere a solenoid valve. relay, or contactor is used. F111 Air Force Projects - European Flight Competition January 1968 Bob attended electronics school in the Air Force. Upon graduation he was assigned to a fighter wing in Germany. During his assignment he prepared seven aircraft for European competition. The fighter wings aircraft won the competition. Bob then returned to the United States and taught advanced radar for two years. Two years later, he returned to Europe. During this assignment, Air Force headquarters Europe selected Bob to open a Precision Measuring Equipment Laboratory (P.M.E.L) in England. It was the first of its kind in the Air Force. Upon his return to the United States, Air Force headquarters assigned Bob to Air Force research command in Florida. This was strictly a scientific assignment for research and development. After three years he moved from Eglin AFB in Florida to Edwards Air Force Base in California where he had direct contact with the National Bureau of Standards and supported research and development aircraft. During this assignment, he designed a modification for the TF X fighter (F-111). This modification made possible an additional 9800 flying hours per year. The F111 was the first swing wing aircraft in history. General Dynamics completed the modification prior to acceptance by the U.S. Air Force. Modification of F111 Aircraft General Dynamics March 1963 As a result of increasing this flying time Bob Received an award from Edwards Air Force Base for Increasing flying time of the F111 by 9,800 hours per year. The Award was Presented by Colonel Grumbles to TSGT Bob Bartol on June 17, 1963

Leave a Reply